Warped steel plates can cause uneven distance between the laser head and the surface of the steel plate during laser operation, thereby affecting processing quality and efficiency. In addition, due to the warping of the steel plate, the contact area between the laser head and the surface of the steel plate becomes smaller, resulting in easy damage to the laser head. Therefore, before laser processing, it is necessary to level the warped steel plate to ensure processing quality and efficiency, and to protect the laser head from damage.
Leveling treatment is a method of restoring a flat state of a steel plate through mechanical force. During the leveling process, the steel plate is sandwiched between two large leveling rollers. Through the rotation and pressure of the rollers, the steel plate is deformed, internal stress is removed, and finally a flat steel plate is obtained. By using this processing method, the problem of steel plate warping can be eliminated, making it meet the requirements of laser processing.
Before laser processing, it is necessary to level the warped steel plate. This can reduce the distance difference between the laser head and the surface of the steel plate, improve processing quality and efficiency. At the same time, leveling treatment can also protect the laser head from damage and extend its service life. Therefore, it is necessary to perform leveling treatment on warped steel plates.
In short, the warped steel plate needs to be leveled before laser processing to ensure processing quality and efficiency, and to protect the laser head from damage. Leveling treatment is an effective method that can eliminate the problem of steel plate warping and make it meet the requirements of laser processing.
| Materials | Length | Width | Thickness | Accuracy |
| Alloy Steel | 300mm | 80 mm | 3 mm | 0.04mm |
After: